Aluminum Bus Bar Alloy Grades

Grades of aluminum bus bar alloy are also different according to different applications. For example, if used for mechanical equipment,etc., pure aluminum alloy series is recommended for most, such as 1060 aluminum sheet, 1070, 1350, and 1050 aluminum plate, whose Al content are not less than 99.00%. and those 1 series aluminum bus bar alloys show extremely high purity, low iron content, superior ductility, outstanding conductivity, etc. Besides, under the condition of low voltage and high current, 6063 T6, 6061 T6 aluminum plate maybe are good choices. As we all know, aluminum bus bar as a conductive system, also widely used in switch contacts, power distribution equipment, bus trunks,etc. So the selection of aluminum bus bar alloy was correspondingly different.

Physical Properties of Aluminum Bus Bar Alloy

1.High Electrical Conductivity. For example, the commonly used 1060 aluminum bus bar alloy has 99.6% Al. content. It belongs to typical high pure aluminum for bus duct, with high electrical conductivity, which can withstand currents of 4000A. Besides, other high-strength aluminium alloys have mechanical resistance of up to 530 Newton/mm². That’s ample to take the strain and pain of thermal expansion.

2.Lightweight, Excellent Ductility. such as 1060, 1070, 1350, 1050 aluminum bus bar alloy, the average density was only 2.68 g/cm^3, so has very light texture. Besides, for the same current rating, the cross-section area of the aluminium busway made by these alloys is greater, are 50% more.

3. Economical, Environmentally Friendly. aluminum bus bar alloy including 1060 aluminum plate, 1070, 1350, and 1050 aluminum plate, Their production process are simple, the technology is mature, and the maintenance cost is low, so it is very economical. Most importantly, it’ s is environmentally friendly, has become a popular material advocated at the present.

Mingtai Aluminum Bus Bar Alloy is Fully Supplied

Here, Mingtai Al. is a large-scale China aluminum bus bar alloy manufacturer and supplier, produces superior 1060 aluminum plate, 1070, 1350, and 1050 aluminum plate, as well as 6063 T6, 6061 T6 aluminum plate for conductor busduct/ busway/ busbar trunking. The thickness range is 10-100mm, and a variety of customized sizes can be selected at will. So, if you are interested in our aluminum alloy plates for aluminum bus bar, just send an e-mail, or leave a message, to tell us the specific usages, specification, quantity, we will timely provide the satisfactory options and quotations for you ! Come on !