What does 3 16 mean in 3 16 aluminum plate? Fractional 3 16 can be converted to 0.1875 inches, 4.7625 mm. Generally refers to the aluminum plate with a thickness of 3-16. Alloy 1060, 1100, 1235, 3003, 3004, 3A21, 3105, 5052, 5083, 5754, 6061, 6063, 6082, 8011, etc.; heat treatment H18, H26, H16, H14, H24, H22, O, etc.
5052 is considered to be one of the easiest aluminum materials to weld. It also has the ability to resist salt water. It is widely used in the body of boats, buses, trucks and trailers. It is also widely used in conventional industries. The processing technology of continuous casting and rolling belongs to the oxidation processing that can be done for the hot-rolled aluminum plate series. It belongs to the more commonly used 5000 series aluminum alloy. Low density, high tensile strength, and high elongation are its main characteristics. The weight of aluminum-magnesium alloy under the same area is lower than other series. The 5000 series aluminum plate belongs to the aluminum alloy series with relatively mature processing technology.
6061 aluminum plate is an aluminum-silicon-magnesium alloy reinforced by precipitation hardening. 6061 is the most widely used aluminum material, everything from pipe fittings and containers to automotive and aerospace parts. It can be used for tooling panels, construction applications, transportation equipment, bridge railing components, and useful in welded structural applications. It is strong and corrosion resistant, plus it is easy to process and weld. The anodized coating can be bonded to the surface of 3 16 aluminum plate 6061 to improve wear resistance and corrosion resistance. One side of the board can be polished to a brushed finish or a mirror finish.
3 16 aluminum plate diamond plate has a novel structure and good anti-skid effect, light weight and excellent durability. The mass per square meter is about 7kg, the tensile strength is 200N per square millimeter, and the diamond aluminum plate has a high elongation rate, with a relative elongation rate higher than 10%. It can withstand high bending and has good toughness. The typical usage is to make non-slip bottom plates, non-slip ladders, or apply them to packaging, construction, curtain walls, etc. On stairs, non-slip aluminum plates are often present.
1) Advantages of density and strength: aluminum plate is a representative alloy with low density and high strength in metal. If the strength is the same, the weight of aluminum plate is the lightest. This advantage of aluminum plate is very beneficial to transportation. .
2) The corrosion resistance of aluminum plate: Corrosion resistance is another advantage of aluminum plate. After the aluminum plate is in contact with the outside air, an oxide film will be formed on the surface, which can prevent the aluminum plate from continuing to oxidize and corrode. It can increase the service life, especially for products used in outdoor environments, which are high-quality raw materials.
3) The conductivity and heat dissipation advantages of aluminum plates: the conductivity and heat dissipation effects of aluminum plates are non-ferrous metals second only to copper, and the price is much lower than copper, so aluminum plates have been widely used in power, electronic heat dissipation and other industries , Which greatly reduces production costs.
Add: NO. 6 Changchun Road, High and New Technology Development Zone, Zhengzhou, Henan, China
